AXIAL SCX24 Driveline Upgrade Kit Harden Steel #45 Front CVDs + Rear Drive Shafts + Brass Pendulum Weights - SCX247FRSX+5 by GPM  [SCX247FRSX+5]

AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5
Price:
CAD$33.01
Brand:
GPM
Model:
SCX247FRSX+5
GTIN:
4894538343519
Condition:
Brand New
Write a review
alt="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5" title="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5"
alt="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5" title="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5"
alt="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5" title="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5"
alt="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5" title="AXIAL 4WD SCX24 DEADBOLT Harden Steel #45 Front CVD Joint+Rear Drive Shaft + Brass Pendulum Wheel Knuckle Axle Weight - 8 pcs set - GPM SCX247FRSX+5"

SCX24 driveline and wheel weight upgrade

This 8-piece upgrade set is built for AXIAL 1/24 SCX24 platforms and combines hardened #45 steel front CVDs, extended rear drive shafts and brass pendulum wheel weights to change unsprung mass and widen track without modifying core chassis components.

The brass pendulum weights add concentrated hub ballast to boost traction during slow, technical crawling and to help recover from low depressions. The front CVDs are machined in hardened #45 steel for improved wear resistance, while the rear drive shafts are 5mm longer than stock to give a slightly wider stance and better lateral stability.

Packing includes

  • Front CVD joint - 2pcs
  • Rear drive shaft - 2pcs
  • Pendulum Wheel Weight - 4pcs

Original Name / Part No:

AXI31610+AXI31609

Compatible Models

  • AXIAL-1/24 4WD SCX24 DEADBOLT-AXI90081
  • AXIAL-1/24 JEEP WRANGLER JLU CRC-AXI00002

Fit this set when you want firmer hub contact and a modestly wider track on AXIAL 1/24 SCX24 cars; the hardened front CVDs, longer rear shafts and 15 g brass pendulums lower and shift mass to improve slow-speed crawling and rut recovery.

What exactly comes in the SCX247FRSX+5 kit?

The kit includes 2 front CVD joints, 2 rear drive shafts and 4 brass pendulum wheel weights for a total of 8 pieces, ready to replace the stock driveline bits.

Will these parts fit my SCX24 DEADBOLT?

These parts are listed as compatible with AXIAL-1/24 4WD SCX24 DEADBOLT-AXI90081 and certain SCX24-based Jeep models shown in the compatible list; verify fit against your hub and axle geometry before final assembly.

How do the pendulum weights affect handling?

The brass pendulums add downward force at the wheel hubs to increase traction at low speeds and on steep terrain, smoothing recoveries from ruts and improving grip while crawling.

Any installation tips I should follow?

After fitting the 5mm longer rear shafts, check clearance for suspension travel and re-tighten hex locks or retaining hardware. Confirm there is no binding through the steering or suspension sweep.

Copyright © 2008-2026 rcjaz.ca All rights reserved