Axial SCX24 Brass Wheel Hex Hub Adapter +5mm Offset - JR-SCX2414-BK by Jazrider  [JR-SCX2414-BK]

SCX24 Brass Hex Hub Adapter Overview

This brass wheel hex adapter is made for the Axial SCX24 platform and is supplied under part reference JR-SCX2414-BK. Made from brass and noted at 10g each in the product name, the adapter provides a fixed +5mm wheel offset per hub to change wheel track and stance on 1/24 scale crawlers.

As a tuning component, the adapter shifts the wheel mounting point outward to alter wheel-to-fender spacing and the model's stance rather than modifying drivetrain parts. Expect changes to wheel clearance and a possible need for longer hex screws or adjustments to wheel inner clearance when installing thicker offsets.

Installation notes: seat the adapter onto the existing wheel hex following the vehicle maker's wheel fastening method, verify concentricity as you tighten, and spin the wheel to check for interference. Use the correct-size hex screws and confirm wheel inner diameter and bearing locations before final use.