Axial SCX10 II Rear Stabilizer Mount SCX2015R by GPM  [SCX2015R]

AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R
Price:
CAD$20.58
Brand:
GPM
Model:
SCX2015R
GTIN:
4894538006353
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R" title="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R"
alt="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R" title="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R"
alt="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R" title="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R"
alt="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R" title="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R"
alt="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R" title="AXIAL Racing SCX10 II Aluminium Rear Chassis Stabilized Mount - 1pc set - GPM SCX2015R"

Rear chassis brace for SCX10 II rigs

This RC-scale rear chassis stabilized mount is designed to cut down unwanted chassis movement during slow-speed crawling and technical trail work. It gives a fixed rear mounting point to help control body roll and lateral sway when working over obstacles.

This part is an aftermarket option and is not factory equipment for the SCX10 II; it is intended for builders using the SCX-10 II Jeep Cherokee platform who want a dedicated rear stabilizing element.

Fit this mount as part of a balanced tuning approach focused on chassis geometry and suspension setup, verify fit on your specific build before final tightening and make incremental link adjustments as needed.

This item is compatible with

  • AXIAL SCX10 II
  • AXIAL SCX10 II 90047

Will this fit standard SCX10 II frames?

It is made for the SCX10 II platform; confirm mounting hole positions on your chassis variant before committing to drilling or permanent hardware changes.

Do I need extra hardware to install it?

Installation depends on your current setup; check your existing rear mount screws and links and use matching grade hardware for secure attachment if replacements are required.

How should I tune after fitting the mount?

Start with stock link lengths, then make small adjustments to link angle and shock preload to dial in roll resistance without over-stiffening the rear end.

Copyright © 2008-2026 rcjaz.ca All rights reserved