Chassis height conversion kit
This aluminium lift-up combo adapts a standard SCX10 II chassis to increase ride height from 77mm up to 100mm, aimed at scale crawling rigs that need extra chassis ground clearance. The kit modifies only the clearance between chassis and ground and is not intended for full vehicle conversion or real-vehicle use.
The assembly centres on a single adjustable tie rod for setting chassis rake and fine tuning ride height. Extending the tie rod moves the chassis toward the top height, shortening it returns the chassis toward the lower position. This single adjustment point helps balance drivetrain and suspension geometry for precise crawling lines.
Original damper mounts remain in place so standard shock hardware and mounting locations continue to be usable, letting you retain stock shocks in many setups without rebuilding them.
Included hardware and components: Stainless Steel Button Head Screw 3*30 - 1pc, 3*25 - 2pcs, 3*20 - 8pcs, 3*18 - 5pcs, 3*16 - 4pcs, 3*14 - 5pcs, Stainless Steel Flat Head Screw 3*16 - 1pc, PEEK/Pelrin collars - 4pcs, aluminium balls - 4pcs, 3*6*6 aluminium collar - 1pc, SCX2 ball ends 5.8*7.5 balls - 2pcs, 4*2.5 O-rings - 4pcs, 2.5*M4*11 screw shafts - 4pcs.
This lift-up combo is supplied as a tuning part to raise chassis clearance and adjust chassis rake on SCX10 II builds using AX90046-compatible frames, providing a single-point adjustable tie rod for quick ride-height changes while keeping original damper mounts.
