AXIAL SCX10 II Center Shaft Upgrade Steel and Aluminium SSCX27037 by GPM  [SSCX27037]

AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037
Price:
CAD$46.82
Brand:
GPM
Model:
SSCX27037
GTIN:
4894538259070
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037" title="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037"
alt="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037" title="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037"
alt="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037" title="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037"
alt="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037" title="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037"
alt="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037" title="AXIAL Racing SCX10 II Steel+Aluminium Center Shaft (S:118mm-128mm, L:130mm-140mm) - 1set - GPM SSCX27037"

Balanced steel and aluminium center shafts

The GPM SSCX27037 center shaft set is an RC-scale replacement built for the AXIAL Racing SCX10 II platform. The kit blends steel at high-wear contact points with aluminium on rotating sections to cut weight while preserving strength where it matters.

This layout helps lower drivetrain load for slower-speed crawling, which can reduce battery draw and improve throttle control during technical maneuvers. The components are shaped for SCX10 II articulation and designed for an uncomplicated swap for hobbyists familiar with the chassis.

The set includes small hardware for mounting: M4*2.5*11 screw shaft - 4pcs, 4*2.5 O-ring - 4pcs.

Compatible Models

  • Axial SCX-10 II AX

Choose this shaft set when you want a lighter centre driveline part for scale crawling on SCX10 II rigs, and remember to follow routine lubrication and inspection after fitting.

Will SSCX27037 fit SCX10 II without machining?

Measure your current shaft lengths against the S:118mm-128mm and L:130mm-140mm ranges listed to confirm fit; most stock SCX10 II setups accept this kit with no modification.

Why mix steel and aluminium in the shafts?

Steel is used at bearings and joints for wear resistance while aluminium lightens rotating parts, reducing inertia and helping the drivetrain run cooler under slow crawling loads.

Are the supplied screws and O-rings enough to install?

The kit ships with the listed M4 screws and O-rings for assembly; have thread locker and basic tools ready and inspect threads before final torque.

How should I maintain these shafts?

Check joints for play periodically, apply a light lubricant suitable for steel and aluminium contact areas, and replace O-rings if they become worn or hardened.

Copyright © 2008-2026 rcjaz.ca All rights reserved