AXIAL SCX10 II Brass Front/Rear Gearbox Cover SCX2012AX by GPM  [SCX2012AX]

AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX
Price:
CAD$30.25
Brand:
GPM
Model:
SCX2012AX
GTIN:
4894538321807
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"
alt="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX" title="AXIAL Racing SCX10 II Brass Front/Rear Gearbox Cover - 5pc set - GPM SCX2012AX"

Brass gearbox cover for AXIAL SCX10 II crawlers

This aftermarket brass front/rear gearbox cover fits AXIAL SCX10 II platforms and compatible housings that use the same cover profile. Made from solid brass, the part protects differential gears while adding purposeful weight to tune vehicle balance for scale crawling setups.

The cover is precision machined to sit close to bearing seats to cut play around the differential, improving steady gear engagement at low crawl speeds. A dedicated oil-fill port is integrated to allow gear lube top-ups without removing the cover.

Installation uses the supplied stainless steel cap head screws and follows standard gearbox access procedures for the SCX10 II chassis. The measured mass is listed as 35 grams, so account for this ballast when planning weight distribution and suspension setup.

Packing includes

  • Gearbox Cover - 1pcs
  • Stainless Steel Cap Head Screw 2.5x16 - 4pcs

Original Name / Part No:

AX31384

Specifications

  • Item: Brass gearbox cover
  • Material: Brass
  • Model Number: SCX2012AX
  • Compatibility: AXIAL SCX10 II chassis
  • Weight: 35 grams
  • Part Location: Front/rear gearbox area
  • Includes: 1 gearbox cover, 4 stainless steel cap head screws 2.5x16

Use this brass cover when you want extra gearbox protection and a compact ballast effect on AXIAL SCX10 II builds; always verify screw torque and bearing clearance during fitting.

This item is compatible with

  • AXIAL SCX10 II
  • AXIAL SCX10 II 90047

Will this cover bolt onto stock SCX10 II housings?

The cover is made to fit AXIAL SCX10 II gearbox flanges that use the same hole pattern, but check your housing mounting points and clearances before final installation.

Are the mounting screws included and the correct length?

Yes, four stainless steel 2.5x16 cap head screws are supplied with the cover for standard gearbox flange attachment.

How much does the cover change handling?

At roughly 35 grams, the brass cover shifts weight low at the gearbox and can improve traction and stability; you may need to retune shocks and alignment to suit the new balance.

Can I add gear oil without removing the cover?

The design includes an access opening for oil filling so routine lubrication can be done without full gearbox removal.

Copyright © 2008-2026 rcjaz.ca All rights reserved