Axial SCX10 48 Pitch 81T Steel Spur Gear SSCX081T by GPM  [SSCX081T]

Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T
Price:
CAD$16.72
Brand:
GPM
Model:
SSCX081T
GTIN:
4894538165876
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 81T - 1pc set (For SCX10, Wraith) - GPM SSCX081T"

48 Pitch 81T Spur for SCX10

This single-piece 48 pitch spur gear is machined from steel #45 as a heavy-duty replacement for Axial SCX10 and Wraith drivetrains. It is supplied as a one-piece 81 tooth spur intended to match compatible 48 pitch gear trains.

The spur functions as the primary gear in a 48 pitch setup, so confirm your motor pinion is the same pitch before fitting. Install using the vehicle's original set screws or retaining hardware and set the gear mesh and alignment for smooth operation.

Steel #45 is chosen for its wear resistance when running long crawls or tough trail sorties; always verify tooth count and pitch if you adjust gear ratios or swap pinions.

Compatible Models

  • SCX10
  • Wraith

How do I confirm my spur is 48 pitch?

Measure the pinion and existing spur specifications or check your vehicle manual; this gear is 48 pitch and must pair with a 48 pitch pinion to mesh correctly.

Any tips when installing the steel spur?

Use the original retaining hardware, set a small backlash for load, and rotate the drivetrain under light load to confirm mesh before full use.

Is steel #45 overkill for trail use?

For sustained crawling or heavy trail runs, steel #45 gives superior wear life compared with plastic or softer alloys, reducing replacement frequency.

Copyright © 2008-2026 rcjaz.ca All rights reserved