Axial RR10/Wraith 2.2 Rally Tires and Plastic Wheels AW2206F/RA45 by GPM  [AW2206F/RA45]

2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45
Price:
CAD$60.63
Brand:
GPM
Model:
AW2206F/RA45
GTIN:
4894538290295
Condition:
Brand New
Write a review
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"
alt="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45" title="2.2'' Rubber Rally Tires And Plastic Wheels - 2pc set - GPM AW2206F/RA45"

2.2 inch Rally Tires and Wheel Overview

This 2.2 inch rubber rally tire and plastic wheel set, model AW2206F/RA45, is an aftermarket option for scale RC rally and off-road models that use a 5mm shaft and 12mm hex hub.

The design prioritizes traction and simple fitment: a deep-groove tread increases mechanical bite on loose or uneven rally stages, while the plastic wheel body keeps mounting straightforward and visually tidy. The rubber compound delivers predictable compliance that helps tune traction without altering suspension geometry.

Fitting is straightforward for hobbyists familiar with 12mm hex wheels and 5mm axle pins; the wheels accept standard hex mounting and swap directly onto compatible hubs. Use these tires to refine mid-speed grip and steering feedback where tread pattern matters more than an ultra-soft compound.

Compatible Models

  • Axial RR10
  • Wraith
  • SMT 10 Grave Digger Monster Jam
  • G-made Rock Buggy R1
  • Other models with 5mm shaft hole and 12mm hex

For scale rally or light rock use where a firmer rubber and pronounced tread help control slide and turn-in, this 2.2 inch set provides a practical, easy-to-fit option for compatible 5mm/12mm hubs without changing driveline parts.

Will these fit Axial RR10 hubs?

They are listed as compatible with Axial RR10 and other models that use a 5mm shaft and 12mm hex; check your hub measurements before installing to confirm fit.

Do the wheels include foam inserts?

The listing describes rubber tires mounted on plastic wheels only; foam inserts are not specified so assume tyres arrive without specialised inserts.

How do these perform on loose rally surfaces?

Expect improved mechanical bite from the deep-groove tread on gravel and packed dirt; the compound is tuned for consistent grip rather than tacky adhesion.

Will I need to change my setup?

These tyres shift traction toward tread-based bite; small adjustments to damping or toe can help rebalance steering feel if you notice increased turn-in.

How many pieces are in the set?

The listing is for a 2pc set, intended as a pair or replacement items for compatible hubs.

Copyright © 2008-2026 rcjaz.ca All rights reserved