Axial RR10 Bomber Wheel Hex Adapters 15mm Brass - RR010X/1215 by GPM  [RR010X/1215]

AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215
Price:
CAD$23.34
Brand:
GPM
Model:
RR010X/1215
GTIN:
4894538330533
Condition:
Brand New
Write a review
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"

15mm brass hex adapters for Axial hubs

The RR010X/1215 kit is a 28-piece wheel hex adapter set built for use with Axial hubs, intended to replace or extend factory hexes to adjust wheel offset and widen the track for improved handling.

The hex bodies are machined from brass and add mass for wheel weighting, listed at roughly 11g per adapter, while the 15mm thickness reduces the gap between wheel and hub compared with thinner originals to help stabilise fitment over rough ground.

Installation uses the supplied hardware and fits compatible Axial hubs; the kit ships with Delrin rings, pins, washers, screws and shims so a standard swap-in replacement requires no extra parts for the listed models.

Packing includes

  • Hex Adapter - 4pcs
  • Delrin Ring 5x7x2.5 - 4pcs
  • Steel Pin 2x10 - 4pcs
  • 5mm Metal Washer - 4pcs
  • Stainless Steel Screw Shaft M3x11.5 - 4pcs
  • Stainless Steel Hex Socket Screw 10mm - 4pcs
  • Shim 5x10x1 - 4pcs

Original Name / Part No:

AX30249 (RR10),AX30429 (WRAITH, SMT10 MONSTER JAM)

Compatible Models

  • Axial WRAITH 4WD ROCK RACER
  • RR10 BOMBER
  • SMT10 GRAVE DIGGER AX90055
  • SMT10 MAX-D AX90057

For Axial owners wanting a simple track-width and weighting change, these 15mm brass hex adapters fit with the supplied hardware and reduce wheel gap to improve stability without modifying hub geometry.

What parts come in the 28-piece kit?

The kit contains four hex adapters plus Delrin rings, steel pins, 5mm washers, stainless screw shafts, hex socket screws and shims for a total of 28 pieces.

Will these fit my RR10 Bomber hubs?

Yes, the adapters are designed for compatible Axial hubs listed in the compatibility box and replace standard hexes without hub modification on those models.

How much does each adapter weigh?

Each brass adapter is listed at about 11g, which adds wheel-end weight to help dampen bounce and improve traction on rough surfaces.

Do I need extra screws or shims to install?

No extra parts are normally required; the kit includes the necessary pins, washers, screws and shims for a standard swap-in on the listed Axial models.

Copyright © 2008-2026 rcjaz.ca All rights reserved