Axial Racing Yeti XL Front Knuckle King Pins Steel Replacement - GPM YTL004S [YTL004S]

Axial Racing Yeti XL Steel King Pin For Front Knuckle(AX31046) - 4pcs - GPM YTL004S

Price:

CAD$3.45

Brand:

GPM

Model:

YTL004S

GTIN:

4894538243161

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Axial Racing - YETI XL

Steel king pins for front knuckle

This replacement king pin set is made for the Axial Racing Yeti XL front knuckle and is identified as GPM model YTL004S. The kit contains four steel king pins that locate the knuckle in the hub carrier and are sized to handle the shear loads you see in RC off-road use.

Fitment is simple for anyone familiar with front-end service: remove the wheel and knuckle assembly, drive out the worn pins from the hub carrier, then press or tap the new steel pins into place making sure they seat and align with existing bearings and hardware. Confirm free rotation and avoid over-tightening surrounding hex screws to prevent binding.

Use these pins as direct service replacements when knuckle pins are damaged or worn, and inspect mating surfaces during maintenance to keep steering response and suspension behavior consistent.

Will these fit Axial Racing Yeti XL front knuckles?

They are specified for Axial Racing Yeti XL front knuckle assemblies; confirm compatibility by checking the knuckle part number AX31046 before installation.

What is the basic replacement procedure?

Remove the wheel and knuckle, extract the old pins, press or tap the new steel pins into place, verify free rotation, and reassemble without over-torquing fasteners.