Axial Racing Yeti Graphite Rear Link Stiffeners - GYT017 by GPM  [GYT017]

Graphite rear link insert for Yeti tuning

This GYT017 kit is an RC-scale rear link stiffener made for the Axial Racing Yeti platform, supplied as 1 pr. As a chassis-level hop-up, the graphite insert reduces flex at the rear link mounting points to help steady rear-end behaviour without altering suspension geometry.

The chosen graphite balances added rigidity with low weight; it increases stiffness over stock plastic components while keeping mass down. The insert functions as structural reinforcement, changing load transfer through the rear link assembly during cornering, landings and chassis roll.

Installation notes: the stiffener replaces or works alongside the original rear link parts at the specified mounting points and uses existing hardware. Basic disassembly of the rear link area is required, and alignment should be checked after fitting to avoid binding. Use conservative torque on link pivots to prevent overtightening.