Axial Racing Wraith Hex Wheel Hub 5mm Wider Offset - AW-23025-GR by Jazrider  [AW-23025-GR]

Axial Racing Wraith Aluminum Hex. Wheel Hub / 5mm Wider (Green)
Price:
CAD$4.17
Brand:
JAZRIDER
Model:
AW-23025-GR
Condition:
Brand New
Write a review

Wraith Aluminum Hex Hub Overview

This aluminum hex wheel hub is a scale replacement built specifically for the Axial Racing Wraith and carries the model number AW-23025-GR. Finished in green, it replaces the stock hex and adds a 5mm wider offset to shift wheel position without changing axle components.

Fit this hub when you want extra track width or added clearance for larger tyres on technical or trail setups. The machined aluminum body gives a firmer mounting point than molded hubs, helping the wheel stay true under load.

To install, remove the original hub, move any bearings or wheel pins as required, and refit using your existing wheel-retaining hardware. Tighten wheel nuts to spec and cycle the suspension to confirm there is no rubbing before driving.

Will this hub fit standard Wraith axles without modification?

It is designed for the Axial Racing Wraith platform. In most cases you can swap the stock hub for this part directly, but inspect axle pins and bearing fit during the changeover.

How will the 5mm wider offset affect handling?

A 5mm wider track increases lateral stability and gives more clearance for larger tyres, though steering response can feel slightly different due to the changed scrub radius.

Are there any installation tips to avoid issues?

Transfer bearings or pins from the original hub if needed, use the same retaining hardware, and double-check torque and full suspension travel to ensure no interference occurs.

Copyright © 2008-2026 rcjaz.ca All rights reserved