AXIAL AX24 XC-1 49mm Front and Rear Damper Upgrade - AX24049FR by GPM  [AX24049FR]

49mm front and rear damper set for AX24 XC-1

This damper set is made for the AXIAL AX24 XC-1 platform using Aluminum 6061-T6 and sized at 49mm to match standard AX24 suspension mounts. The design reduces internal friction and helps absorb low-speed impacts during rock crawling so the model holds line and balance over technical sections.

The shocks feature an adjustable top spring retainer to change spring preload and effective stiffness for different crawl lines or added payload. The fitted black springs keep the original wire diameter, and a set of 0.35mm silver replacement springs is supplied to fine-tune spring rate without modifying the shock body.

Included hardware covers mounting fasteners and the spare springs needed to swap between stock and replacement rates. These dampers install in either front or rear locations on the AX24 XC-1 chassis; always check the shock eye spacing and mount fit before final assembly.

Use these 49mm aluminum dampers to tune axle articulation and spring rate on a 1/24 AX24 XC-1 crawler, swapping springs and adjusting the top retainer to suit driving style and terrain.