Axial AX10 Deadbolt Aluminum Steering Block Upgrade - AX10-24003-OR by Jazrider  [AX10-24003-OR]

AX10 Deadbolt aluminum steering block upgrade

This replacement steering block is a machined aluminum hop-up for the Axial AX10 Deadbolt chassis. As an RC-scale component, it swaps in for common plastic steering blocks to cut flex under load and provide a firmer mounting point for the steering knuckle.

Material and finish: the part is machined from aluminum with an anodized orange finish for wear resistance and to match orange-themed builds. It installs at chassis level as the steering link mount and is intended for model-scale use only.

Installation notes: remove the existing steering block and detach the steering knuckle to fit the new unit. Original steering hardware is often reused, so confirm screw types and lengths before starting. Check fitment and use controlled torque on hex screws to avoid damaging knuckle or hub threads.

Tuning role: fitting a machined aluminum block reduces compliance at the steering pivot, helping preserve alignment under load and sharpening steering feedback for precise slow-speed crawling lines.