Axial AX10 Deadbolt Aluminum Chassis Linkage - AX10-24005-OR by Jazrider  [AX10-24005-OR]

Precision Link for AX10 Deadbolt

The Axial AX10 Deadbolt Aluminum Chassis Linkage from Jazrider is an RC-scale replacement link made for the AX10 Deadbolt platform. Machined aluminum reduces flex under load to keep chassis geometry consistent during slow-speed crawling and technical trail driving.

This component replaces a molded factory link where a firmer, repeatable mounting point is preferred. Use it to fine tune ride height, roll center and lateral alignment in combination with your existing suspension, steering and body mounting setup. The part is finished in orange for quick visual identification during maintenance.

Installation notes: the linkage installs in the same locations as the stock part on AX10 Deadbolt frames and accepts the same ball studs and mounting points. Verify thread engagement, use thread locking on metal-to-metal joints as needed, and recheck alignment after initial runs to confirm the chassis behavior you want.

Fit this aluminum linkage to reduce chassis tolerance and deliver a more predictable base for tuning suspension and steering on AX10 Deadbolt builds.