ARRMA Talion 6S EXB Center Front 116mm & Rear 180mm 4140 CVD Driveshafts MTV6037S by GPM  [MTV6037S]

This CVD driveshaft set is an RC-scale replacement designed for ARRMA Talion 6S EXB platforms, manufactured from hardened 4140 steel to increase wear resistance and torsional strength. The geometry is maintained for a direct swap of damaged or worn center front and center rear drive components.

Key measured attributes included in the kit are a center front CVD length of 116mm and a center rear CVD length of 180mm, with pin thickness of 3.0mm. Parts receive a hardened black finish to resist surface abrasion and ensure consistent contact at CVD joints.

The shafts are supplied as direct replacements for the original items, referenced to AR310472+ARA-3398, and are sized to retain the original suspension and drivetrain geometry on the Talion 6S EXB chassis.

Installation and tuning notes: fitting hardened 4140 CVDs reduces drivetrain deflection under heavy loads, helps preserve gearbox and differential alignment, and can slow wear on mating cups when installed correctly. After fitting, check hub interfaces and wheel hex play and confirm free rotation across suspension travel to prevent binding.

Compatible Models

• ARRMA 1/7 Talion 6S EXB 4X4 RTR Brushless Speed Truck-ARA7707V6