ARRMA MINI KRATON 3S Front Alloy Shock Set 62mm MAKM062F by GPM  [MAKM062F]

Upgraded front shocks for MINI KRATON 3S

This GPM front shock set is an aftermarket replacement made for the ARRMA 1/16 MINI KRATON 3S platform. The shocks use machined aluminum bodies and are prefilled with 500cSt silicone oil to establish a stable damping baseline. Bleeder screws are fitted to speed up air release during servicing, while threaded spring preload collars let you fine tune ride height without removing the shock from the vehicle.

Springs arrive installed as a black pair with a 1.2mm wire diameter that matches the original specification, and an additional silver spring with a 1.3mm wire diameter is supplied for a firmer setup. The units measure a 62mm centre distance for the MINI KRATON front mounting area, and the hardened shock shaft is 3.0mm versus the stock 2.5mm to cut down flex and boost rigidity under load.

Intended for routine maintenance and chassis tuning, these shocks help deliver more consistent rebound and compression across track or off-road runs. The bleeder valves and preload adjusters simplify on-site adjustments and they install using the stock front shock mount points on compatible ARRMA MINI KRATON 3S kits.

Owners aiming to normalise front suspension feel and make shock servicing easier will find these 62mm aluminum shocks a direct-fit aftermarket option with spare spring choices and a stiffer 3.0mm shaft for quicker response.