APC AP1613 16x13 Composite Propeller for RC Aircraft  [AP1613]

APC PROPELLER 16x13 (120 PATTERN)
Price:
CAD$17.64
Brand:
APC
Model:
AP1613
Condition:
Brand New
Write a review

APC AP1613: Product Details

The APC AP1613 is a hobby-grade 16x13 propeller supplied as a replacement for electric-powered model aircraft and scale builds. It is offered as a single spare for situations where a higher pitch is needed to boost cruise speed or provide extra load-carrying thrust.

Fitment is straightforward: the 16x13 marking denotes diameter and pitch, and the prop is designed to mount on standard hobby hubs using the correct shaft adapter and securing nut for your motor or spinner. Verify your hub style and clearance before installation to prevent contact with the airframe or spinner.

In tuning use the prop changes thrust and RPM characteristics; selecting a 16x13 typically raises pitch-driven speed and load while increasing current draw, so pair it with an ESC and motor rated for the heavier load. Always balance the prop before flight and inspect for nicks or warping after any rough handling.

How does the 16x13 size affect flight performance?

The 16x13 designation sets diameter and pitch; higher pitch increases forward speed and load capacity but usually reduces peak RPM and raises current draw on the motor.

What hardware do I need to fit the APC AP1613?

Use the correct shaft adapter or prop saver and the appropriate locking nut for your hub, ensure the prop seats flat, and confirm spinner and airframe clearance before running the motor.

Can I swap this prop for other hobby props directly?

It can replace many hobby props if the shaft diameter and hub type match; always check motor/ESC limits and clearance on your specific airframe before making a substitution.

Copyright © 2008-2026 rcjaz.ca All rights reserved