APC AP11080EP 11x8EP Electric Reverse/Pusher Propeller  [AP11080EP]

Fitment and tuning overview

The APC AP11080EP is an 11x8EP electric propeller intended for reverse or pusher installations on scale electric models. Its reinforced composite blade construction favors efficient thrust at cruise RPMs rather than maximizing low-speed torque.

Installation notes: verify shaft diameter and the adapter or hub fit before mounting, secure the prop nut to the recommended torque, and confirm the prop orientation for reverse/pusher rotation so the blade pitch generates thrust in the intended direction. Always check motor and ESC rotation before the first run.

Tuning guidance: diameter and pitch set static thrust and free RPM, so pair this 11x8 prop with motors and ESCs that operate well at higher RPM ranges instead of low-RPM torque setups. Balance the prop and inspect blades for nicks after each use to keep motor load and handling predictable.

Safety and maintenance: balance before operation, replace blades if chipped, and keep bystanders clear during run-up. Use proper locking hardware and thread locker when recommended for your adapter system.