Adjustable Titanium Turnbuckle 50mm M4 L/R - HUDY 992450  [HSP-992450]

HUDY 992450 - Titanium Adjustable Turnbuckle 50mm M4 L/R (2)
Price:
CAD$27.96
Brand:
HUDY
Model:
HSP-992450
Condition:
Brand New
Write a review

Titanium turnbuckle made for exact R/C adjustments

This HUDY 992450 turnbuckle is an R/C scale tie-rod component machined from titanium, intended for precise steering and suspension adjustments on electric and nitro R/C cars. The pair includes one left-hand and one right-hand M4 threaded rod at 50mm length, allowing symmetric end-to-end adjustment without adding fixtures or adapters.

Use this part where adjustable rod ends are needed to fine-tune toe, camber link length, or steering geometry. The titanium material offers a balance of strength and reduced weight compared with steel, while the left/right threading simplifies setup: turning the central body alters overall length without rotating chassis-mounted rod ends.

During installation confirm full thread engagement at both ends and avoid overtightening against plastic rod ends or composite housings. When measuring setup changes, adjust one side at a time and recheck alignment to keep steering geometry consistent. This product is an R/C accessory only and is not intended for any full-size vehicle use.

Specifications

  • Item: Adjustable turnbuckle, 2 pcs
  • Material: Titanium
  • Model Number: 992450
  • Size: 50mm
  • Thread: M4 left and right
  • Quantity: 2 pcs (1 L, 1 R)
  • Compatibility: R/C tie-rod and turnbuckle applications

A compact option for hobbyists who need a lightweight, corrosion-resistant adjustable link for steering or suspension tuning, designed for straightforward length adjustment and durable service in typical R/C use.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I check thread engagement during fitment?

Screw each rod end fully onto the turnbuckle until threads seat, then back off slightly to allow adjustment. Ensure several full threads remain engaged at both ends before tightening any lock nuts.

What torque is safe when installing into plastic rod ends?

Use light finger-tight plus a small quarter turn with a wrench; avoid heavy torque that can crush plastic. If in doubt, use metal rod ends or washers to spread the load.

Can I adjust both sides without removing the servo horn?

Yes. Adjust one turnbuckle half a turn at a time while the other side is held steady, then re-center your servo and check steering travel to maintain alignment.

Any tips to prevent thread galling on titanium?

Apply a light coat of suitable anti-seize or thread lubricant on mating threads and avoid excessive force when adjusting. Periodic inspection keeps threads smooth and functional.

Does the kit include both left and right threads?

Yes. The set contains two turnbuckles: one left-threaded and one right-threaded M4, each 50mm in length, ready for installation.

Copyright © 2008-2026 rcjaz.ca All rights reserved