59ml Silicone Differential Oil 1000.000cst - Arrowmax am-210100  [am-210100]

Arrowmax Silicone Diff Fluid 59ml 1000.000cst
Price:
CAD$0.00
Brand:
Arrowmax
Model:
am-210100
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Precision silicone diff oil for RC setups

This Arrowmax am-210100 silicone diff fluid is designed for scale RC use to adjust how a model's differential transfers torque between wheels. Supplied in a 59ml bottle, it suits hobby electric and nitro vehicles that use silicone oil in planetary or bevel-style differentials.

The 1000.000cst rating defines the fluid's nominal viscosity under standard test conditions. Higher viscosities increase differential coupling under load for improved traction and reduced differential slip, while lower viscosities permit freer action and faster turn-in. Choose this grade when you want a firmer diff response without changing mechanical parts.

Filling most RC diffs is routine maintenance: remove the unit from the chassis if needed, open the case, drain old oil, then refill to the correct internal volume for your diff type. Ensure seals and mating faces are clean and resealed to prevent leaks, avoid overfilling, and cycle the diff slowly to purge trapped air.

Always confirm fit and required oil volume for your specific diff assembly before use. Do not use this product in real vehicle systems.

Basic tools include a small syringe or dropper for controlled filling, a clean cloth, appropriate screwdrivers or hex drivers to access the housing, and a workspace free of dust. Use steady, measured fills to avoid spills.
Fill slowly and operate the diff gently while filling to let trapped air escape. Tipping or rotating the assembly while dispensing helps purge bubbles before sealing the case.
Refill to the internal volume recommended by your diff or car manufacturer. Overfilling can cause leaks and underfilling reduces the tuning effect, so follow your specific assembly guidance.
Inspect seals and mating surfaces for weeps, run the diff slowly to ensure smooth operation and no air noise, and keep an eye on mounting points for any sign of leakage during the first runs.

Copyright © 2008-2026 rcjaz.ca All rights reserved