3Racing TAMIYA DF03 Rear Graphite Shock Tower DF03RA-01 - RC Spare Part  [DF03RA-01]

Tamiya DF03 Rear Graphite Shock Tower - 3RACING DF03RA-01
Price:
CAD$0.00
Brand:
3Racing
Model:
DF03RA-01
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Graphite rear shock mount for DF03 tuning

This graphite rear shock tower fits the TAMIYA DF03 chassis as an aftermarket replacement, designed to locate rear dampers and secure suspension link geometry. The graphite plate offers a firmer mounting surface than common plastics while keeping mass low to help maintain predictable handling.

Fitment is a direct replacement at the DF03 rear tower mounting points, using the chassis original screw holes and existing hardware once the factory tower is removed. Check alignment before final torque and preserve any original spacers or washers so damper shafts stay correctly centred.

From a setup perspective, the stiffer top mount reduces flex at the damper head and can alter rear response during cornering and under load. Use the tower to compare mounting positions and damper angles, and monitor ride height and wheel tracking as you tune.

Is this designed just for the DF03 platform?

Yes, the tower is specified to mount to the standard rear tower points on the DF03 chassis.

Can I reuse the original screws and spacers?

In most cases you can reuse the DF03 rear hardware, but confirm spacers and screws are present and fit correctly before tightening.

Will a graphite tower noticeably change handling?

Graphite typically reduces flex at the damper mount, which can sharpen rear response; the effect is best evaluated by on-track comparisons with the stock tower.

Any tips when installing this tower?

Fit loosely first, confirm damper alignment and ride height, then tighten progressively to avoid inducing preload on the suspension.

Copyright © 2008-2026 rcjaz.ca All rights reserved