3Racing FW05-R/FW05RR KYOSHO Graphite Front A-arms Plate FW05-006  [FW05-006]

Front suspension reinforcement for FW05 models

This graphite front A-arms plate is a direct-fit upgrade for KYOSHO FW05-R and FW05RR chassis, replacing the stock front suspension arm mounting surface with a stiffer graphite panel. It acts as a structural element in the front end and changes steering feedback and suspension feel without altering the chassis geometry.

Compatibility is restricted to KYOSHO FW05-R and FW05RR as stated in the product name. Graphite gives reduced weight and better flex control versus many plastics, so this plate is useful when a firmer front response is needed for 1/10-scale on-road tuning sessions.

Fitting is straightforward for anyone comfortable with basic chassis maintenance: remove the body to access the front suspension, remove the existing front A-arms mounting plate or brace, and install the graphite plate using the original fastener locations. Verify A-arm and steering link alignment before final torque and perform a short test run to check handling and trims.

From a setup viewpoint, swapping to a graphite plate typically sharpens steering response and cuts unwanted flex on corner entry. Make small, incremental changes to front shock rates and anti-roll settings when testing so you can isolate the plate's influence on handling.