3racing Cero FWD Graphite Chassis Conversion - Factory Pro O-3CK002  [FP-O-3CK002]

Graphite upgrade for Cero FWD chassis

The Factory Pro O-3CK002 graphite conversion kit is an aftermarket upgrade designed to fit the 3racing Cero FWD kit. It replaces selected kit plates with graphite pieces to alter chassis stiffness and sharpen front-end response while keeping the original geometry intact.

This kit targets hobbyists looking to tune handling by swapping stock parts for stiffer graphite components. Adding graphite typically raises torsional rigidity and produces a firmer front feel; these changes influence weight transfer and steering bite and should be explored through stepwise adjustments rather than sweeping replacements.

Installation overview: the graphite items are precision cut to match Cero FWD kit mounting points and are fitted in the same locations as the original parts using the kit fasteners. Standard RC tools like hex drivers are sufficient, though careful alignment during assembly is important to prevent binding or preload on suspension and steering linkages.

Tuning notes: after installing graphite plates expect shifts in weight balance and stiffness. Begin with conservative trims and track tests, then tweak ride height, shock valving and front toe or camber to restore desired turn-in and grip. Treat graphite plates as a tuning element to be combined with measured ESC, motor and tyre choices for the best results.

Compatibility

Compatible with: 3racing Cero FWD Kit

Use this kit to fine tune stiffness-related handling on the 3racing Cero FWD platform; verify fit and make incremental setup changes on the bench before full track sessions.