1/12 Pancar Geardiff Hub for Tuning - Arrowmax AM-931010  [AM-931010]

Compact 1/12 Pancar geardiff hub details

This Arrowmax AM-931010 hub is an aftermarket replacement piece for 1/12 pancar geardiff assemblies, intended for hobbyists who tune or swap drivetrain parts on small-scale touring and pan cars. It functions as a dedicated hub component to interface the internal gears with the drive system on 1/12 geardiff setups.

Fitment is specific to 1/12 Pancar geardiff layouts, so check your diff housing and mounting pattern before installation. The hub connects the diff internals to the outputs and should match your chassis geometry and bearing locations for correct operation.

Installation notes: disassemble the geardiff following your chassis manual, inspect gear faces and bearing seats, then fit the hub ensuring correct gear mesh and minimal axial play. Proper seating keeps gear engagement consistent and helps maintain reliable drivetrain behaviour.

Service and setup: inspect the hub interface regularly for play or wear, remove debris from the diff area, and confirm bearings and gears spin freely after reassembly. Use small mesh and preload adjustments with this hub to fine tune traction and handling on 1/12 pancar circuits.