1/10 Touring Low-Profile 2S LiPo Battery Pack 6200mAh 65C/130C - Arrowmax AM-700706 AM Lipo  [AM-700706]

Arrowmax AM-700706 AM Lipo 6200mAh 2S TC Low Profile - 7.4V 65C Continuos 130C Burst (Graphene Pro)
Price:
CAD$118.01
Brand:
Arrowmax
Model:
AM-700706
Write a review

Compact 2S 6200mAh LiPo for on-road touring use

This Arrowmax AM-700706 2S LiPo is a low-profile, Graphene-enhanced battery designed for RC-scale on-road touring and stock-class use. The pack is specified at 6200mAh with a 7.4V nominal voltage and rated 65C continuous with 130C burst, delivering a low internal resistance and a stable voltage under load to support consistent motor response.

Physically compact to suit modern low-centre-of-gravity (LCG) chassis layouts, the pack helps maintain chassis balance while offering punch for stock-class power limits. The form factor and connector placement are intended to fit common 1/10 touring battery bays; verify clearance and cable routing on your specific chassis before installation.

When installing, position the pack to keep the centre of mass low and centered, secure with existing battery straps or mounting hardware, and ensure connectors are routed clear of servo linkages, ESC fan intakes, and suspension travel. For tuning, this pack supports conservative gearing and timing choices typical of stock-class setups, where voltage stability and low internal resistance aid throttle consistency across laps.

Specifications

  • Item: LiPo battery pack
  • Capacity: 6200mAh
  • Voltage: 7.4V (2S)
  • C Rating: 65C continuous, 130C burst
  • Dimensions: 139 x 47 x 25 mm
  • Weight: 288 g
  • Material: Graphene Pro cells
  • Model Number: AM-700706
  • Compatibility: Intended for 1/10 touring and stock-class on-road platforms

Choose this pack when you need a low-profile 2S solution that delivers steady voltage for on-road stock and touring formats, and always follow proper LiPo charging and storage safety practices.

Connector type may vary by supplier or batch. Confirm the fitted connector on the product page or with the vendor before ordering if you need a specific plug.
The AM-700706 offers high discharge capability, but competition rules differ. Check event regulations for permitted voltages and capacities before entering a modified class.
Mount the battery low and as close to the chassis centreline as possible, secure it firmly with straps or hook-and-loop, and route leads away from moving parts to preserve balance and reliability.
Charge as a 2S LiPo with a dedicated LiPo charger, use the manufacturer recommended charge current and balancing routine, and store at the recommended storage voltage when not in use.
Low-profile packs reduce frontal area but do not change cell mass; ensure your ESC and motor have adequate airflow and that wiring does not obstruct cooling paths.
Store at the manufacturer recommended storage voltage in a cool, dry place, check periodically for swelling, and keep batteries in a fire-safe container when not in use.

Copyright © 2008-2026 rcjaz.ca All rights reserved