1/10 Formula Front Wing HUDY 293701 — White aerodynamic front wing  [HSP-293701]

Price:
CAD$25.78
Brand:
HUDY
Model:
HSP-293701
Condition:
Brand New
Write a review

HUDY 1/10 formula front wing overview

This HUDY 293701 front wing is an RC-scale component made for 1/10 formula style cars, supplied in white for hobbyists needing a replacement or a baseline wing for aerodynamic tuning. It functions as a front-end aero element to change airflow and front balance on bodies that accept a separate wing.

For installation, align the wing with the front mounting points on the body, test-fit before securing, and use the original or compatible small screws or clips to fix it. If trimming the body is necessary, cut conservatively and confirm clearance with full steering and suspension travel before final assembly.

When tuning, use this wing to trial different incidence angles and mounting heights where the body permits. Make small adjustments, record lap times or handling impressions after each change, and compare results to find the most effective setup for your chassis and track.

Specifications

  • Item 1/10 Formula Front Wing
  • Model Number 293701
  • Material Manufacturer did not specify
  • Compatibility 1/10 formula scale RC cars, fits bodies designed for a separate front wing

Offered as a direct replacement or a baseline tuning wing for 1/10 formula setups, this component is useful when evaluating front aerodynamic changes or replacing damaged body hardware.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I check if this wing fits my 1/10 formula body?

Measure your body’s front mounting area and compare it to the wing mounting footprint. Test-fit the wing without glue or final hardware to ensure steering and suspension clearance before committing to permanent fixing.

Will I need extra screws or clips to mount it?

Many bodies reuse existing small fasteners for wings, but carry a selection of compatible screws and nylon clips as a precaution. Use stainless or plated screws to resist corrosion during outdoor use.

Can I trim or modify the wing to fit unusual bodies?

Yes, minor trimming is possible; make incremental cuts and recheck clearance with steering and suspension movement. Work slowly to avoid over-trimming and weakening the mounting area.

What is the best way to evaluate tuning changes with this wing?

Change one variable at a time, such as incidence or height, then run multiple laps and note handling differences. Keep a simple log of settings and lap times to identify trends that improve cornering or straight-line stability.

Copyright © 2008-2026 rcjaz.ca All rights reserved