Yokomo Y2-301ACA Precision Aluminum Suspension Mount Set for YD-2/YD-4  [Y2-301ACA]

Yokomo Y2-301ACA Aluminum Adjustable Suspension Mount Set forYD-2/YD-4
Price:
CAD$107.31
Brand:
Yokomo
Model:
Y2-301ACA
GTIN:
0639342212811
Condition:
Brand New
Write a review

Tight tuning options for YD-2 and YD-4 chassis

Upgrade your YD-2 or YD-4 chassis with the Yokomo Y2-301ACA Aluminum Adjustable Suspension Mount Set. It lets hobbyists fine tune suspension geometry by changing suspension pin angles using the supplied interchangeable resin bushings. You can also lower the suspension pin position past standard settings to expand your setup choices and dial in on-track balance.

Built for accurate adjustment and long life

The kit contains two front A mounts (39.5-42.7mm) plus one rear B (43.5-46.7mm) and one rear C (46.4-49.7mm) mount, all machined from black anodized aluminum. The anodized finish improves wear resistance while the chamfered edges give the parts a neat, professional look without adding unnecessary weight.

Specifications

  • Material: Aluminum
  • Compatibility: YD-2/YD-4 Series
  • Front Mount Range: 39.5-42.7mm
  • Rear B Mount Range: 43.5-46.7mm
  • Rear C Mount Range: 46.4-49.7mm
  • Finish: Black Anodized with Beveled Edges

A practical upgrade for drivers aiming to improve corner grip and responsiveness, this mount set suits club racers and track enthusiasts who like to experiment with suspension geometry.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these mounts fit stock YD-2 or YD-4 arms?

Yes. The Y2-301ACA is made for the YD-2 and YD-4 platforms and mates with the standard suspension arm locations for straightforward installation.

How do adjustable pin angles affect handling?

Changing the pin angle shifts suspension geometry which alters roll center and camber change rates, helping you tune turn-in, mid-corner balance and rear traction depending on track conditions.

Any tips for installing the resin bushings?

Press the resin bushings into the mount holes evenly and check pin movement before final tightening. Use a small amount of light grease on pin contact points to reduce wear and keep smooth action.

Copyright © 2008-2025 rcjaz.ca All rights reserved