Yokomo PG-6447A 64DP 47T Hard-Coated Aluminum Pinion  [PG-6447A]

Price:
CAD$10.74
Brand:
Yokomo
Model:
PG-6447A
GTIN:
0639342208258
Condition:
Brand New
Write a review

Yokomo PG-6447A Precision 64 Pitch Pinion

The Yokomo PG-6447A pinion is machined from hard-coated aluminum to provide a lightweight yet durable gear option for RC drivetrains. Its 64 pitch and 47 tooth configuration is made to mesh with matching spur gears, ensuring dependable compatibility and smooth operation.

Benefits of an Aluminum Pinion

Aluminum pinions like the Yokomo PG-6447A offer a good balance between strength and reduced rotating mass, which helps lower drivetrain inertia and can improve acceleration response on paved tracks. They suit high-speed setups where quick throttle reaction is needed.

Setup Tips for Smooth Operation

  • Verify correct mesh with the matching spur gear to avoid accelerated wear.
  • Inspect and clear debris from between teeth after dusty or rough runs.
  • Apply a light lubricant to the teeth to cut friction and keep engagement consistent.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which cars can use the PG-6447A pinion?

The PG-6447A fits setups that use 64 pitch spur gears, commonly found on many 1/10 scale on-road and racing chassis. Check your spur gear pitch and tooth count before fitting.

What is the easiest way to set the gear mesh?

Use a thin strip of paper between the pinion and spur, bring the gears together, then tighten and recheck after a short run to confirm the mesh remains correct.

How often should I inspect the pinion for wear?

Visually check the teeth after heavy track use or every few sessions; replace the pinion if you spot burrs, deformation, or uneven wear.

Copyright © 2008-2025 rcjaz.ca All rights reserved