Yokomo B8-RTC-02 RTC Rear Toe Arm 54mm Shock 40.5mm  [B8-RTC-02]

Yokomo B8-RTC-02 54mmxShock40.5mm RTC Sus-Arm for BD-8
Price:
CAD$7.02
Brand:
Yokomo
Model:
B8-RTC-02
GTIN:
3888
Condition:
Brand New
Write a review

Yokomo B8-RTC-02 Suspension Arm Overview

The Yokomo B8-RTC-02 suspension arm enables installation of the RTC rear toe control on BD8 and BD7 2016 chassis. Crafted from graphite-infused resin, the arm aims to deliver a lightweight component with enhanced stiffness for predictable handling on track.

Fitment and Critical Dimensions

Made for the BD8 family, this arm positions the inner and outer suspension pins 54mm apart for accurate geometry. The distance from the inner pin to the shock mount is 40.5mm, which helps when dialing suspension and roll centre for high speed stability.

Compatible Chassis Models

  • MRTC-BD8-P
  • MRTC-BD8AP
  • MRTC-BD8
  • MRTC-BD8A
  • MRTC-BD8SV
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this arm fit BD7 setups as well as BD8?

Yes, the B8-RTC-02 was produced to work with BD8 and BD7 2016 variants, so mounting points and geometry match those chassis when installing the RTC system.

Does graphite-infused resin change handling feel?

The graphite content increases stiffness without a big weight penalty, which tends to sharpen steering response and keep alignment under load compared with softer plastics.

Any setup tips for using this arm on carpet?

Start with factory geometry using the 54mm pin spacing and 40.5mm shock point, then adjust toe and roll centre in small steps; the stiffer arm can expose handling changes quicker than stock parts.

Copyright © 2008-2025 rcjaz.ca All rights reserved