Yokomo B7-SS05A 0.5mm Aluminum Suspension Spacer for BD7  [B7-SS05A]

Yokomo B7-SS05A 0.5mm Aluminum Sus-mount spacer for BD7
Price:
CAD$20.55
Brand:
Yokomo
Model:
B7-SS05A
GTIN:
0639342204038
Condition:
Brand New
Write a review

Quick BD7 Setup with Yokomo B7-SS05A

The Yokomo B7-SS05A 0.5mm aluminum sus-mount spacer is built to improve the fine control of your BD7 chassis. This spacer installs without removing the suspension mount hardware, letting you change ride height quickly while keeping setup stable. It contains two integrated types for FF/RR and four separate options for FR/RF to fit different tuning needs.

Fast Fit and Broad Chassis Compatibility

The design of the Yokomo B7-SS05A makes on-car adjustments straightforward, so racers can experiment with suspension geometry between runs. It fits a wide range of Yokomo chassis lines, including the MRTC-BD919, MRTC-BD10, MSR-BD11 families and related models, making it a practical tuning part for hobbyists.

Suitable Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • MRTC-BD11-1
  • MSR-BD11
  • MRTC-BD11US
  • MRTC-BD11A-1
  • MSR-010FE
  • MSR-010FEA
  • MSR-BD12
  • MSR-BD12A
  • MSR-BDFWD
  • MDR-020
  • MDR-020BL
  • MDR-020P
  • MDR-020R
  • MRTC-BD715B
  • MRTC-BD715O
  • MRTC-BD715S
  • MRTC-BD716
  • MRTC-BD716H
  • MRTC-BD716O
  • MRTC-BD716S
  • MRTC-BD7RS3S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What does the Yokomo B7-SS05A spacer actually change on the car?

The spacer alters the suspension mount height by 0.5mm increments, which tweaks roll center and camber behavior to affect handling balance.

Will this part fit older BD7 variants and related chassis?

It is compatible with many Yokomo BD7-related models listed above, but always check clearance and part orientation before fitting.

Any tips for trackside swaps using this spacer?

Keep a small set of hex drivers and a clean tray for the tiny spacers. Change one corner at a time and note settings to return to previous geometry if needed.

Copyright © 2008-2025 rcjaz.ca All rights reserved