XRAY 970120 12x1.0 O-Ring Set (10 Pieces)  [XR-970120]

XRAY 970120 O-Ring 12x1.0 (10)
Price:
CAD$11.77
Brand:
XRAY
Model:
XR-970120
Condition:
Brand New
Write a review
alt="XRAY 970120 O-Ring 12x1.0 (10)" title="XRAY 970120 O-Ring 12x1.0 (10)"

Replacement O-Rings for XRAY Shock Caps

When servicing your XRAY RC model, keeping the shock caps sealed is essential. The XRAY 970120 O-Ring set, sized 12x1mm, is intended for upper cap sealing to help prevent oil leakage and preserve shock performance during running.

Recommended Fitment

These O-rings are made to suit XRAY XB4 shock assemblies and provide a close fit to improve sealing. Whether you are dialing in damping for a track day or weekend bashing, fresh O-rings help maintain predictable shock behaviour by stopping oil bleed.

Quick Installation Advice

Fitting the XRAY 970120 rings is simple: remove the old seals from the upper cap, clean mating surfaces, then seat the new 12x1mm O-rings evenly. Inspect for nicks and replace if you spot wear to avoid premature leaks and to extend shock life.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
They are specified at 12x1mm so they can fit other shocks with the same groove dimensions. Always verify the diameter and cross section before fitting to avoid poor sealing.
Check O-rings during routine shock servicing or whenever you change oil. Replace them if they feel brittle, flattened, or if you notice seepage around the cap.
Use a clean, lint-free cloth on mating surfaces and avoid sharp tools that can nick the seal. Lightly coat the O-ring with shock oil to ease fitting and reduce pinching.

Copyright © 2008-2025 rcjaz.ca All rights reserved