XRAY 389181 XMC300 Micro ESC V-2 Compact Race Controller  [XR-389181]

XRAY 389181 XMC300 Micro Speed Controller 300 with Brake V-2
Price:
CAD$130.99
Brand:
XRAY
Model:
XR-389181
Condition:
Brand New
Write a review
alt="XRAY 389181 XMC300 Micro Speed Controller 300 with Brake V-2" title="XRAY 389181 XMC300 Micro Speed Controller 300 with Brake V-2"
alt="XRAY 389181 XMC300 Micro Speed Controller 300 with Brake V-2" title="XRAY 389181 XMC300 Micro Speed Controller 300 with Brake V-2"

Fine control for micro track racing

The XRAY 389181 XMC300 Micro Speed Controller is a small but capable ESC tailored for serious racers running the XRAY M18 micro racecar. Built with SMD components, this unit delivers precise throttle response and a tight footprint for tight-setup cars.

Built for competitive micro events

Set up for forward-only running with accurate throttle and brake modulation, the XMC300 integrates a battery elimination circuit (BEC) that gives a steady 5V/0.5A supply for receiver and servos. It works with micro stock, micro modified and Super Size motors, giving you flexibility across common micro racing classes.

Specifications

  • Input Power: 4-6 cell NiMH/NiCD (4.8V - 7.2V)
  • Min. Resistance: 0.016Ω/7.5V
  • Max. Resistance: 0.018Ω/6V
  • Continuous Current: max. 18A
  • Peak Current: max. 72A/0.05 sec
  • PWM Frequency: 1750 Hz
  • BEC Output: 5V / 0.5A
  • Dimensions (without wires): 29.9x15.5x10.5 mm (1.18x0.61x0.41 inches)
  • Temperature Range: 0-40 C (32-72 F)

Compact and feature focused, the XRAY 389181 XMC300 Micro Speed Controller is a practical upgrade for racers wanting tighter throttle feel and reliable electronics on the M18 platform.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which batteries suit the XMC300 best?

Use 4 to 6 cell NiMH or NiCD packs in the 4.8V to 7.2V range as specified. Match cell count to your motor and track conditions for consistent power delivery.

Do I need extra wiring for the BEC output?

No extra battery is required for your receiver or servos if you use the built-in 5V/0.5A BEC, but check servo current draw if you have high-power servos.

Is the XMC300 compatible with my micro modified motor?

Yes, the XMC300 supports micro modified motors as well as micro stock and Super Size motors, so it covers most common micro racing setups.

Copyright © 2008-2025 rcjaz.ca All rights reserved