XRAY 368101 - 13.2mm Big Bore Front Shock Set for XB2  [XR-368101]

XRAY 368101 - Front Shock Absorbers - BIG Bore - SET (2)
Price:
CAD$136.98
Brand:
XRAY
Model:
XR-368101
Condition:
Brand New
Write a review

Big Bore Front Shocks to Improve XB2 Handling

Explore how the XRAY 368101 - 13.2mm Big Bore Front Shock Absorbers sharpen your XB2's response on rough lanes and carpet. The larger bore layout helps absorb impacts, improving landing control and front-end traction during aggressive runs.

Features Focused on Track Control

These shocks include two piston thicknesses, 2.0mm and 2.5mm, so you can tune damping to suit track conditions. Pre-oiled X-rings provide smooth shaft travel while limiting dirt ingress for longer seal life. The eccentric lower mounting pivot ball lets you alter the shock angle for better handling balance.

Fitment Tips and Installation Notes

The kit supplies composite bushings intended for use with aluminium shock caps; do not pair them with composite caps. Make sure the X-rings remain pre-oiled during assembly. Lower pivot balls are required for installation and should be taken from your kit or bought separately if needed.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these work on both dirt and carpet layouts?

Yes. The XRAY 368101 shocks are intended for both dirt and carpet XB2 variants, offering adaptable damping for each surface when tuned correctly.

What does the set include and what is not supplied?

The set includes the shock bodies, pre-oiled X-rings and composite bushings for aluminium caps. Pivot balls for the lower joints are not included and must come from your kit or be bought separately.

How do I choose between 2.0mm and 2.5mm pistons?

Start with the thinner 2.0mm piston for smoother damping on loose surfaces, and move to 2.5mm when you need firmer compression control on tighter, high-speed tracks.

Copyright © 2008-2025 rcjaz.ca All rights reserved