Band of molded composite eccentric bushings for aluminum rear hub providers #353355 and #353365. The eccentric bushings are utilized for right back suspension system geometry modification. Exchanging the bushings enables 9 different geometry settings. Each bushing is marked for effortless identification.
The couple of bushings includes the following: 0 = no offset; beginning in center of bushing 1 = space offset 1mm from center 1.1 = area offset 1mm right and 1mm horizontal from center 2 = 2° outboard toe-in bushing important: always use comparable bushing on staying and straight back aluminum right back hub in the event that you use an eccentric gap bushing (1, 1.1 and 2), left component must be other toward right component.
