XRAY 323353-G Graphite Rear Upright Composite Racing Upgrade  [XR-323353-G]

XRAY 323353-G Composite Upright Rear - Graphite
Price:
CAD$17.55
Brand:
XRAY
Model:
XR-323353-G
Condition:
Brand New
Write a review

Graphite Rear Upright Built for Track Stability

Made from a tuned graphite composite, the XRAY 323353-G rear upright balances strength and low mass to sharpen handling. Supplied for both left and right fitment, this upright is aimed at high-traction circuits where improved stability and faster corner entry matter most.

Optimised for High Traction Surfaces

These graphite uprights perform well on high and very high traction layouts, helping the car hold its line and carry more speed through corners. The design offers seven upper roll center settings so you can refine handling to match surface grip.

Design Features That Aid Reliability

With a 0 degree toe configuration, the uprights keep consistent suspension geometry under heavy loads. A set screw hole locks the pivot pin in place for added durability, while the external 5x12mm ball bearings and inner 5x10mm bearings balance drivetrain strength with reduced unsprung mass.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which chassis types accept the XRAY 323353-G upright?

This upright is compatible with a number of touring and on-road RC platforms that use similar rear hub geometry; always check your chassis drawing or parts list for direct fitment before buying.

How do the seven roll center positions change handling?

Adjusting the upper roll center alters body roll and inside wheel load during cornering. Use higher positions for quicker turn-in on grippy surfaces, and lower positions for smoother mid-corner balance.

What bearings are required and how should I maintain them?

The part uses external 5x12mm and internal 5x10mm bearings. Keep them clean and lightly lubricated with bearing oil for long life, and replace if you detect play or roughness.

Copyright © 2008-2025 rcjaz.ca All rights reserved