XRAY 302480 1.0mm Front Anti-Roll Bar for T4 Touring Car - Precision Tuning  [XR-302480]

XRAY #302480 - Anti-roll Bar Front 1.0 mm
Price:
CAD$18.23
Brand:
XRAY
Model:
XR-302480
Condition:
Brand New
Write a review

Dial In Front Roll for Your XRAY T4

The XRAY 302480 1.0mm Front Anti-Roll Bar is a precision part made to refine handling on the XRAY T4 1/10 touring car. This softer alternative to the standard 1.4mm bar lets you make subtle setup changes to match track grip and driving style.

Adjust Handling and Turn-In Behavior

Fitting the 1.0mm bar increases front chassis roll, which boosts front traction and can improve turn-in and mid-corner feel while possibly increasing the chance of oversteer. Using a stiffer bar reduces front roll and front traction, lowering off-power steering at corner entry and promoting understeer for quicker steering response.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the XRAY 302480 fit older T4 chassis versions?

This bar is made for the XRAY T4 family; fit depends on layout and mounting brackets, so check your chassis hardware before swapping. Minor adjustments may be needed on older variants.

When should I choose 1.0mm over 1.4mm?

Choose the 1.0mm bar when you need more front bite and softer roll, such as low-grip surfaces or for added on-power rotation. Use 1.4mm if you want a sharper steering response and less off-power steering.

Any setup tips for club racing?

Start with stock settings and swap in the 1.0mm bar, then adjust front camber and roll centers to balance increased front traction. Make changes in small steps and test multiple runs to judge effects.

Copyright © 2008-2025 rcjaz.ca All rights reserved