Walkera HM1#BV2 6-Channel 3D RTF Helicopter  [HM1#BV2]

Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set
Price:
CAD$242.51
Brand:
Walkera
Model:
HM1#BV2
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set" title="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set"
alt="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set" title="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set"
alt="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set" title="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set"
alt="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set" title="Walkera 1#B V2 2.4G RC Helicopter 6 Channel 3D RTF Ready-To-Fly Kit Set"

Advanced 3D Control for the Walkera HM1#BV2

The Walkera HM1#BV2 brings collective pitch capability and CCPM mixing into a rugged metal chassis, letting experienced pilots practise rolls, inverted flight and dynamic swoops with accurate control. The robust frame and tuned collective system make it well suited to pilots refining advanced 3D skills.

Sturdy Construction for Predictable Handling

A compact metal main frame and reinforced tail boom give the Walkera HM1#BV2 the structural stability needed for precise maneuvers. The layout keeps critical components accessible so routine servicing and part swaps for servos or motors are straightforward.

Brushed Motors, Li-Po Power and 2.4G Control

Powered by brushed motors, the Walkera HM1#BV2 delivers punchy response for sport and 3D flying. The supplied 7.4V 1200mAh Li-Po battery typically yields about 7-8 minutes depending on throttle use. 2.4G radio tech reduces interference and improves stick feel and responsiveness in busy flying areas.

Specifications

  • Main Rotor Diameter: 556 mm
  • Tail Rotor Diameter: 145 mm
  • Overall Length: 545 mm
  • All-up Weight: 388g (with battery)
  • Battery: 7.4V 1200mAh Li-Po
  • Transmitter: WK-2601
  • Receiver: RX-2607
  • Gyro: Built-in
  • Servo: Weight: 8.5g, Speed: 0.11sec/60 degrees (4.8V), Torque: 0.9kg/cm (4.8V)

The Walkera HM1#BV2 is a solid choice for hobbyists aiming to push into consistent 3D flight; its durable build, dependable motors and modern radio setup support focused practice sessions.

What setup changes help when starting 3D training?

Begin with mild rates and more exponential on the transmitter to soften stick inputs, then increase sensitivity as you gain confidence. Check blade tracking and head tension before attempting inverted maneuvers.

How should I manage battery life during practice flights?

Plan for 7-8 minute flights on the 7.4V 1200mAh pack and keep spare batteries charged. Rotate packs and monitor voltage to avoid deep discharge when flying aggressively.

Which parts wear out fastest and should be kept as spares?

Rotor blades, main drive gears, swash components and small linkages typically see the most wear from hard landings and 3D flight. Carry spare blades, a service tool and extra servo linkages.

Is the onboard gyro adjustable for different skill levels?

The built-in gyro provides baseline stability. For finer tuning you can adjust gyro gain via the transmitter or upgrade to an external gyro if you need more advanced damping and tuning options.

Copyright © 2008-2025 rcjaz.ca All rights reserved