TRAXXAS 1/10 Front Driveshaft Pair 6mm Axle - FR102F by GPM  [FR102F]

Front CVD driveshaft assembly for TRAXXAS 1/10

This RC front driveshaft assembly is made for TRAXXAS 1/10 platforms and combines 6061 aluminium alloy with medium carbon steel in a CVD layout. The components replace the front driveline section and are supplied as a matched pair with screw pins for retention, offering a balance of strength and manageable weight suitable for routine hobby upgrades.

Fitting requires replacement of the front driveshaft components listed in the compatibility box below. Check the axle diameter before fitting; the primary fitment here is for 6mm axle models while several entries use a 5mm axle and reference the #9080 upgrade path. Use the supplied screw pins to secure the driveshafts and verify spline engagement and clearance during the first test runs.

The assembly functions as a modular replacement or upgrade to improve driveline consistency and serviceability when repairing or upgrading the front end of compatible TRAXXAS models.

Confirm axle size and clearance before fitting, then use the supplied pins to secure the new front driveshafts and restore front driveline function on the supported TRAXXAS models.