Tamiya PS-47 Iridescent Pink/Gold 100ml Polycarbonate Spray  [86047]

Tamiya 86047 - PS-47 Iridescent Pink/Gold - 100ml Spray Can
Price:
CAD$9.23
Brand:
Tamiya
Model:
86047
GTIN:
4950344860470
Condition:
Brand New
Write a review

Tamiya PS-47 Iridescent Finish for RC Polycarbonate Shells

Tamiya PS-47 Iridescent Pink/Gold spray paint is formulated for RC car hobbyists who want a shifting pink-to-gold sheen on polycarbonate bodies. The 100ml aerosol produces a translucent, dynamic coat that catches light and adds visual depth to race or show bodies.

Best Practice for Spraying

Apply PS-47 to the inside face of the polycarbonate shell for a smooth, durable finish. Hold the can about 30cm from the surface and spray in light, overlapping passes. Allow each thin layer to dry before adding further coats to build depth without runs.

Resistance and Surface Compatibility

This paint offers resistance to oil and fuel, making it suitable for nitro or gas powered models while being tailored exclusively for polycarbonate. Do not apply PS-47 to general plastic models, as it can damage those surfaces.

If the shell already has paint, remove loose coatings and lightly scuff the inside before spraying PS-47 to ensure adhesion. Test a small area first.
Start with two to three light coats, letting each dry between passes. Add more thin layers until you reach the desired iridescence rather than using heavy single coats.
Use low-tack masking tape or vinyl to protect windows and trim. Apply paint to the inside, then remove masks after the paint has mostly cured to avoid lifting the finish.

Copyright © 2008-2025 rcjaz.ca All rights reserved