Tamiya 58331 TB Evolution 4 / IV TB Evo IV Kit TRF is classified under AWD Electric Powered On-Road Touring Cars assembly kit 1/10 scale
Presenting the 4th variation connected with higher end TB Evolution R/C rushing car. The TB Evo IV is actually developed predicated on rushing performance of TB Evo III and motorist feedback, causing a framework featuring your whole benefits of numerous up-to-date R/C rushing technology including newly developed aluminum bulkhead, a sealed bevel gear address to safeguards gears from dirt and stones on a patio circuit and a far more durable bevel gear developed from a certain carbon based item. The model might be fashioned with 2.5mm dense reduced and 2mm dense top carbon structures.
About the TB Evolution IV
- Newly created aluminum bulkhead to firmly secure drive train while increasing gear performance.
- A sealed bevel gear target protects gears from dust and rocks on a garden circuit.
- Features a durable bevel gear developed from an original carbon based product.
- Aluminum propeller shaft is actually produced as a 3-piece shaft, reducing rate loss as a consequence of friction during framework roll.
- Suspension system system is wholly upgraded for improved cornering with brand new lightweight and even more compact suspension system supply, hub provider and front/rear upright.
- Increased damper attachment settings for effortless damper modification, allowing damper to fit your driving design.
- Kit includes medium narrow race slick tires.
- Engine and body perhaps not included
The Reedy Touring vehicle Race winning TB Evolution IV has become available! The shaft driven 4WD TB Evolution rushing framework simply keeps boosting, developing fresh requirements in the R/C globe. Based on information removed from genuine competition performances by Tamiya's factory group, Tamiya Racing Factory (TRF), vital elements are redesigned to get you to the top higher end rushing framework. The key concept behind the TB Evolution IV should enhance drive train efficiency and minmise fat through the entire suspension system system system. Drive train effectiveness is vital for competition, specially in stock program and 19 change spec groups. The results is a fine-tuned superior framework this is the ultimate tool for every and each expert motorist.
Solid Chassis Design For solid Chassis Design, both 2.5mm lower deck and 2.0mm top deck were made out of Carbon Fiber Reinforced Polymer (CFRP). To help expand reinforce the framework frame the TB Evo IV also contains aluminum front side component and right back bulkheads, helping you to obtain the complete top top features of the enhanced drive train. These bulkheads also assist quick access toward differentials for effortless upkeep. Kit also includes 2 types of hub providers available, permitting assortment of a 2� or 4� caster angle.
3-Piece Propeller Shaft a brand new 3-piece lightweight aluminum propeller shaft decreases friction due to chassis roll. Coupled with front side one-way bearing, rate destroyed when not accelerating besides happens to be compensated enhancing long-distance performance. Blue anodized aluminum motor temperature sink considerably improves temperature dissipation minimizing the interior ramifications of an overheated motor.
choice Loaded right back Suspension utilising the standard suspension system system system mount, straight back toe-angle is prepared at 3�, however with the addition of Tamiya's up-grade suspension system system mount (offered independently) it is possible to enhance the number of 6 toe-angle settings including 0.5-3�. To obtain additional accurate damper settings, standard front side component and backside paid arms is reversed increasing damper pivot options to a complete of 5 functions.
option Parts your can purchase Optimum effectiveness
| Item No. | Product Title |
| 49345 | TB Evolution IV Titanium Screw Set (restricted release) |
| 53709 | Fluorine Coated Suspension Ball (8 pcs.) |
| 53712 | TB Evolution IV Suspension Mount X (Blue) |
| 53713 | TB Evolution IV Suspension Mount A (Blue) |
| 53714 | TB Evolution IV Suspension Mount B (Blue) |
| 53715 | TB Evolution IV Suspension Mount C (Blue) |
| 53716 | TB Evolution IV Suspension Mount D (Blue) |
| 53717 | TB Evolution IV Suspension Mount E (Blue) |
| 53718 | TB Evolution IV Titanium Wheel Axle |
| 53719 | TB Evolution IV Lightweight Propeller Joint Shaft (F) |
| 53720 | TB Evolution IV Lightweight Propeller Joint Shaft (R) |
| 53721 | TB development IV Aluminum One-Way Ring Gear |
| 53722 | TB Evolution IV Stabilizer Rod Set |
| 53723 | TB Evolution IV Aluminum Servo Mount (Blue) |
| 53724 | TB Evolution IV 46mm Lightweight Swing Shaft |
| 53726 | Dia. 6mm Shim Set (3 types / 10pcs. Each) |
Basic Specifications
- General size: 366mm
- Total width: 189mm
- Clearance: 5mm
- body weight Fully-Equipped: 1,440g (dimension includes TP-S3003 servo, TRF2002 ESC, RC-3600HV Battery and Super inventory Type-T motor)
- Wheelbase: 257mm
- Tread: 163mm (Front & straight back)
- Chassis Material: CFRP
- Chassis Shape: Double-Deck Frame
- Steering Tie Rod: 3 component
- suspension system: Double Wishbone (F&R)
- Caster Angle: 4� (F) / 0� (R)
- Camber Angle: Adjustable (F&R)
- Toe Angle: Adjustable (F) / 2-3.5� (R)
- Skid Angle: 0� (F&R)
- Damper: TRF Super Low Friction Dampers (F&R)
- Drive train: Shaft Driven Regular 4WD
- Gear Ratio: 6.48:1, 6.07:1 (standard)
- Diff. gear system: One-Way (F) / Ball-Diff (R)
- Speed Controller: Electronic Speed Controller
- Tire Width: 24mm (F&R)
- Tire Diameter: 64mm (F&R)
- Tread Pattern: Slicks (F&R)
Necessary products (Available individually)
- Body
- RS-540 Type engine
- R/C product: Adspec GT-I or 2-channel R/C system with electronic price control
- Battery: Tamiya 7.2V Racing Pack or comparable
