O.S. Speed 12 TZ Spec II Race-Tuned 1/10 Engine  [OS-11385]

O.S. Engine Speed 12TZ Spec II
Price:
CAD$536.76
Brand:
O.S. Engine
Model:
OS-11385
Condition:
Brand New
Write a review

O.S. Speed 12 TZ Spec II for 1/10 Track Racing

Built for serious on-road competition, the O.S. Speed 12 TZ Spec II brings tuned power and IFMAR compliance to 1/10 scale racers. The design balances durability and responsiveness so experienced drivers can extract consistent lap times from their setups.

Balance, Cooling and Vibration Control

Core to the O.S. Speed 12 TZ Spec II is a silicon-filled crankshaft that reduces vibration and improves balance. A nine-fin aluminum cooling head helps shed heat during long runs, while the two-piece turbo-style cylinder head with a magnesium outer shell improves thermal control and toughness under race conditions.

Included Items and Key Race Features

The package includes the P7 glow plug and the 11HBS Slide Valve Carburetor for smooth, precise throttle response suited to on-road tuning. Also supplied are a decal sheet, instruction manual, a 5.5mm carb reducer and a rubber sealing ring for the exhaust, so you have the basic parts needed to install and tune the engine.

Specifications

  • Displacement: 0.128 cu in (2.1cc)
  • Bore: 0.543" (13.8mm)
  • Stroke: 0.551" (14.0mm)
  • Practical RPM Range: 5,000-44,000
  • Power Output: 1.7 ps/35,000 RPM
  • Weight: 7.336oz (208g)
  • Fuel: 10%-30% nitro, minimum 16% lubricant

The O.S. Speed 12 TZ Spec II is focused on performance for seasoned racers who want compact power in a 1/10 package. Note that this high-performance unit is supplied without warranty, so it is best suited to hobbyists comfortable with tuning and maintenance.

The silicon-filled crankshaft reduces vibration and helps the engine run smoother at high RPM, which improves throttle feel and makes car handling more predictable during lap-to-lap racing.
Start with the supplied 11HBS Slide Valve Carburetor settings and make small needle adjustments; observe temperature and plug color after a few runs and lean or richen gradually to match track altitude and ambient temperature.
Yes, the O.S. Speed 12 TZ Spec II is designed to meet IFMAR criteria for 1/10 scale racing, but always confirm specific event rules and any local limits before racing.
A good starting point is around 20% nitro with at least 16% lubricant. From there, adjust nitro percentage and oil content based on running temperatures and peak RPM behavior.

Copyright © 2008-2025 rcjaz.ca All rights reserved