Serpent 411234 Front Spring Pair for S100 - Race Tuners  [SER411234]

Serpent SER411234 Spring Front 10 lbs S100 (2)
Price:
CAD$9.31
Brand:
Serpent
Model:
SER411234
Condition:
Brand New
Write a review

Dial In S100 Handling with Serpent 411234 Front Springs

Hobbyists aiming to sharpen S100 chassis dynamics will find the Serpent 411234 front springs a practical upgrade. These springs carry a 10 lbs rate to help you tune roll and responsiveness without adding unpredictability. Their consistent feel helps keep steering precise during aggressive laps.

Benefits of 10 lbs Front Springs for Racing

Made to fit the S100 series, the Serpent 411234 springs install cleanly into factory shock assemblies and work well with common shock oils and pistons. The 10 lbs rate gives firmer support through corners and under acceleration, which assists drivers chasing predictable traction and quicker lap times.

Will Serpent 411234 fit older S100 shock bodies?

These springs are designed for the S100 geometry but can fit older shock bodies if the internal diameter and eyelet spacing match. Inspect your shocks for clearance before final fitting.

When should I run 10 lbs springs on the front?

Use 10 lbs front springs when you need less body roll and crisper turn-in, such as on high-grip asphalt or prepared clay tracks. They pair well with medium-to-stiff shock oil for a balanced feel.

How do I maintain these springs for long life?

Keep springs free of dirt and corrosion by wiping after each run and storing dry. Check for deformation and replace if the coils show uneven spacing or fatigue.

Copyright © 2008-2025 rcjaz.ca All rights reserved