Serpent SER110511 3x8x2.5 mm Ball Bearings - Pair  [SER110511]

Serpent SER110511 Ballbearing 3x8x2.5 (2)
Price:
CAD$16.11
Brand:
Serpent
Model:
SER110511
Condition:
Brand New
Write a review

Smooth Rotation Upgrade with Serpent SER110511 Bearings

The Serpent SER110511 ball bearings are a solid choice for hobbyists wanting to improve the efficiency of their RC models. At 3x8x2.5 mm these bearings are built to deliver steady, low-friction rotation inside wheels, gearboxes and drivetrains.

Where to Use These Bearings

These bearings slide into common RC mounting points to boost rotational performance and cut down on binding. Reduced friction often means crisper handling and longer life for moving parts, which is helpful for regular maintenance and tune ups.

Fits and Fitting Tips

With a standard dimension of 3x8x2.5 mm the Serpent SER110511 bearings suit a wide selection of RC vehicles. Installation is simple: remove the worn bearing, press the new unit into place, and check it spins freely before reassembling.

Which parts of an RC car typically use 3x8x2.5 bearings?

Small hubs, idler pulleys and some gearbox outputs commonly use 3x8x2.5 bearings. Check your parts diagram to confirm fitment.

Do these bearings come pre greased?

They usually include light factory lubrication. For competition use you can re grease with a thin bearing oil for quieter rotation.

Any tips for pressing them in without damage?

Use a socket or bearing driver that presses against the outer race only, apply steady force and avoid hitting the inner race to prevent ball misalignment.

Copyright © 2008-2025 rcjaz.ca All rights reserved