Serpent SER110136 M2.5x8 Countersunk Allen Screws 10-Pack  [SER110136]

Serpent SER110136 Screw Allen Countersunk M2.5x8 (10)
Price:
CAD$8.92
Brand:
Serpent
Model:
SER110136
Condition:
Brand New
Write a review

Serpent SER110136 Countersunk Screws for precise RC fastening

If you build or repair RC models, the Serpent SER110136 Countersunk Screws are a practical choice. These M2.5x8mm fasteners sit flush with panels and mounts, improving the look and reducing snag points on your model.

Benefits of a flush countersunk fit

Countersunk heads are useful when you need a smooth surface on gear like chassis plates and body mounts. The hex socket on each SER110136 screw helps you apply torque without cam out, lowering the chance of stripping during installation.

Suitable uses across RC platforms

These M2.5x8 screws work across many RC layouts, from competition on-road cars to everyday buggies. Keep a pack in your toolbox for quick replacements and detailed assembly work.

Are these M2.5x8 screws strong enough for suspension mounts?

They are fine for low to moderate load points, but for heavy suspension joints you may prefer a larger diameter or grade-strong hardware to handle impact loads.

Do these screws require thread locking compound?

Use a light thread locker on metal-to-metal joints that experience vibration. For body panels and temporary fittings you can skip it for easier removal.

What driver fits the hex socket?

A small Allen key or hex driver sized for M2.5 hardware will fit these Serpent SER110136 screws and give good control when tightening.

Copyright © 2008-2025 rcjaz.ca All rights reserved