2.4w/RX-481 + RX482, battery & charger - Sanwa M12S  [SW-M12S-481-2]

This could be an Airtronics M12S Super 2.4GHz FH4T 4-Channel Digital High-Response Telemetry System with Advanced Programming and SSL Help. This phenomenal M12S Super features its own groundbreaking features that set it along with the initial M12, rendering it the "must have actually in fact the truth is" radio system for competition motorists anyway quantities.

Feature:

• 30per cent faster Response Time versus Original M12 - It's the Fastest broadcast on the planet, Period!
  
• Telemetry Mixing allows you to Mix Telemetry information and Telemetry Alerts to various Stations
  
• Telemetry Assign Allows Exterior unit to obtain in touch and Control various Transmitter Functions
  
• BASIC Menu Simplifies Transmitter utilize - undoubtedly modification Between FUNDAMENTAL and STANDARD Menus
  
• Enhanced CODE AUX Function Allow Naming which help entirely to 10 various Functions
  
• Model Template Function allows you to effectively build Complicated Models
  
• Includes Lightweight, 4 mobile AA size Battery Tray
  
• Adjustable Trigger Lever to Personalized Fit Your Finger Size
  
• Steering Wheel Offset Bracket Enables Expanded individualized Changes
  
• Enhanced Vibration Alerts and Customizable Vibration Levels
  
• Improved LCD with Optional White or Blue Background Colors
  
• Earphone Jack allows you to Hear Alerts and Alarms Without Outside noise Interference
  
• Expanded Ackerman Function
  
• Expanded Timer/Alarm Functions, Including fresh Countdown Timer
  
• Throttle slowly Monitors the Transmitter's Voltage and Closes the Throttle to Alert you Recharge
  
• Reaction Mode LEDs to See present Throttle and Steering Response Modes immediately
  
• Expanded rushing Mode Function

M12S Super Transmitter Specifications:

• Manufacturing power: 100mW
  
• Nominal Input Voltage: 4.8 to 7.4v (6.6v Default)
  
• Running Voltage volume: 4.0 to 9.0v
  
• Frequency: 2.4GHz FHSS
  
• Modulation Type: FH3 or FH4T (individual Selectable) - doesn't assist FH2 Modulation

RX-481 Internal Antenna, FHSS-4 Surface 4ch Receiver Specifications:

• Frequency 2.4GHz FH3/FH4T Selectable Via Transmitter
  
• Nominal Input Voltage 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S life time or 2S LiPo)
  
• body fat 0.25oz (7.1g)
  
• dimensions 0.71 x 0.96 x 1.06in (18.2 x 24.4 x 27.1mm)
  
• Battery Fail secure Limit 3.5 to 5.0 Volts (FH3) / 3.5 to 7.4 Volts (FH4T)

RX-482 Internal Antenna, FHSS-4/SSL Surface 4ch Receiver Specifications:

• Frequency 2.4GHz FH4T Selectable Via Transmitter
  
• Nominal Input Voltage 4.8 to 7.4 Volts (4-6C NiCD/MH, 2S life or 2S LiPo)
  
• Fat 0.25oz (7.1g)
  
• Dimensions 0.71 x 0.96 x 1.06in (18.2 x 24.4 x 27.1mm)
  
• Battery Fail secure Limit 3.5 to 7.4 Volts (FH4T)

Attention:

• If you're making use of Analog servos within model, steer clear of the SHR or SSR Channel reaction Mode for many sites. Use NOR Channel reaction Mode with Analog servos. Using SHR or SSR Channel effect Modes with Analog servos might lead to bad performance or even dilemmas the servos and/or the receiver. SHR and SSR Channel response Modes when you have to be precisely employed in combination with Digital servos. Since the SHR Channel impact Mode might employed with almost any Digital servo, the SSR Channel response Mode should you should be used in combination with Airtronics or Sanwa Super response SRG Digital servos. Not absolutely all ESCs are suited to SHR or SSR Channel effect Modes. When your ESC won't run properly, replace the Throttle Channel response Mode to NOR. SSR Channel reaction Mode is actually available whenever found in combination with appropriate FH4 or FH4T Super reaction receiver.
• simply take notice your Nominal Input Voltage is 4.8 to 7.4v, consequently this transmitter will not be suitable for 2S LiPo. If users have to replace the AA Sized battery power tray to a battery pack, please select a battery energy which to be that voltage range.