RADTEC S3M516 Low Friction White Front Drive Belt for BD8SV and Destiny  [RAD-BEL-10004]

RAD-BEL-10004 Radtec Low Friction White Front Drive Belt (S3M516) for Stock (BD8SV/Destiny)
Price:
CAD$19.35
Brand:
RADTEC
Model:
RAD-BEL-10004
Condition:
Brand New
Write a review

Tune your drivetrain with the RADTEC S3M516

The RADTEC Low Friction White Front Drive Belt (S3M516) delivers smoother power transfer for BD8SV and Destiny stock models, helping to cut drivetrain resistance and keep runs consistent. Its low friction surface is aimed at maintaining efficient torque delivery through the front end.

Fitment and performance details

Made to match BD8SV and Destiny stock layouts, this belt is straightforward to fit and aligns cleanly with the existing pulleys. The reduced friction material helps limit belt wear and keeps drivetrain losses to a minimum during both practice sessions and race days.

When to choose this belt

Racers chasing consistent lap times will notice reduced drivetrain drag, while hobbyists benefit from greater longevity between replacements. The RADTEC S3M516 is a practical upgrade for routine maintenance or when refreshing worn drive components.

The belt is produced to fit BD8SV and Destiny stock models. Other chassis may use a similar profile, but you should check belt length and pulley compatibility before fitting.
Start with a moderate tension and spin the drivetrain by hand to check for smooth rotation. Avoid over-tightening; aim for minimal deflection while keeping the belt seated on pulleys.
Inspect for fraying, glazing or debris after several runs and clean pulleys before refitting. Replace the belt if you see uneven wear or cracking.
You may notice slightly crisper throttle response and less drivetrain drag, which can translate to steadier power through corner exits. Changes are subtle but useful for consistent performance.

Copyright © 2008-2025 rcjaz.ca All rights reserved