Mr.Hobby GSI-C1 10ml Gloss White Lacquer  [GSI-C1]

Mr.Hobby GSI-C1 - Gloss - White - 10ml
Price:
CAD$4.56
Brand:
Mr.Hobby
Model:
GSI-C1
Condition:
Brand New
Write a review

Mr.Hobby GSI-C1 Gloss White Paint - 10ml

Mr.Hobby GSI-C1 Gloss White is a lacquer paint aimed at model builders and hobbyists who need a bright, even finish. The 10ml size is handy for touch ups, small kits, and figure work, giving a consistent glossy coat for a range of scale projects.

Application Notes

Mr.Hobby GSI-C1 applies smoothly with a brush or airbrush. Its lacquer base dries faster than many solvent paints, helping you move between coats with less waiting. Always test spray settings on a scrap part to get an even flow and avoid runs.

Finishing Tips

Ensure parts are clean and primed before painting to maximise adhesion. When airbrushing, thin the paint with Mr.Hobby thinner until the spray is stable and atomised. Apply several light layers rather than one heavy coat to achieve a mirror-like gloss without brush marks.

Yes, it is suitable for airbrush use. Thin with Mr.Hobby thinner until the spray is even and test on scrap to set pressure and distance.
Drying is relatively fast for a lacquer, often touch dry in 15 to 30 minutes depending on temperature and humidity. Full cure may take longer under cool or damp conditions.
Yes, it adheres well over compatible primers if the primer is fully cured. For best results use lacquer-compatible clear coats and allow each layer to dry between coats.

Copyright © 2008-2025 rcjaz.ca All rights reserved