Mr. Hobby GSI-B511 White Surfacer Primer - Smooth Base Coat  [GSI-B511]

Mr.Hobby GSI-B511 - Mr. White Surfacer
Price:
CAD$10.09
Brand:
Mr.Hobby
Model:
GSI-B511
Condition:
Brand New
Write a review

Prep and Prime with Mr. Hobby GSI-B511 White Surfacer

Mr. Hobby GSI-B511 White Surfacer is a practical primer for hobbyists aiming for a level base on RC bodies and parts. It helps even out light imperfections and creates a consistent surface for subsequent paint layers.

Benefits of Mr. Hobby GSI-B511

This white surfacer produces an even film that improves paint adhesion and conceals small scratches and blemishes. It is a handy step for achieving cleaner topcoats and better overall finish quality.

How to Apply

Start with a clean, dry surface. Shake the can thoroughly and apply light, even passes to build coverage without runs. Allow each coat to dry fully before sanding or applying further layers for the best result.

Can this surfacer be used on flexible polycarbonate shells?

It works well on common plastic and metal parts, but flexible polycarbonate bodies may need special preparation or a product formulated for polycarbonate. Test on a scrap piece first and use light adhesion techniques if needed.

Do I need to sand between coats?

Light sanding between properly dried coats helps level the surface and improve smoothness. Use fine grit paper and remove dust before applying the next layer.

Which paints work over this surfacer?

Most hobby acrylic and lacquer topcoats adhere well to a fully cured surfacer layer. Make sure the surfacer is dry and sanded if required, then follow your paint maker's instructions for best results.

Copyright © 2008-2025 rcjaz.ca All rights reserved