Kyosho 32620MY MINI-Z AWD SUBARU IMPREZA with Aero Kit and CFRP hood Metallic Yellow MINI-Z MA-020 On-Road RTR (Ready-to-Run) 1/27 scale
To create its effective performance to more motorists, the MINI-Z AWD is easily obtainable in a Readyset. The MA-020 framework features VCS (variable camber suspension system) in-front part that optimizes camber modification with suspension system system move and a specially developed circuit board. The framework design enables area for setting up the optional gyro product. The gyro are modified by switching somewhat amount towards framework to reflect the quantity of steering modification giving an answer to alterations in framework position, permitting novices to specialists to use a motor vehicle with regards to their complete potential. Completely fitted straight down with accuracy ball bearings, the high drive effectiveness of MA-020 framework is complimented into the Readyset by initial scale human anatomy and 2.4GHz Syncro KT-531P R/C system that basically requires no regularity musical company environment; all at a fantastic value expense. Just set the batteries to relish the excitement of drift driving using the included group of drift tires. The framework works together the most of ASC MINI-Z figures (additional elements possibly necessary for somebody designs). The MINI-Z AWD guarantees a real world of dramatic competition action for you yourself to experience and luxuriate in.
●MINI-Z AWD Readyset dedicated to MA-020 framework.
●Special circuit board updated with optimized steering control system.
●Chassis features gyro sensitiveness modification function.
●Drift tires are put up as standard.
●Readyset requires just batteries become prepared to use it!
●Features 2.4GHz Syncro KT-531P transmitter that could require no setup of regularity bands.
●Factory completed body includes display model quality finish.
●Features VCS (variable camber suspension system system system) that adjusts camber prior to suspension system system system swing.
●Coil springtime on front suspension system system system is merely changed without tools.
●wide selection of optional elements is had become installed.
●Note) Optional ICS may not be used. Also, this model is very created for the KT-531P transmitter. It isn't appropriate the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. Its just appropriate initial gyro device (supplied separately).
Belated model requirements was at truth developed inside 2nd generation Subaru Impreza. Hawkeye headlights completed the solid face using this device that formed the beds base for aero tuning featuring big straight back wing and various ducts.
Includes trendy design of Syncro KT-531P transmitter. Features steering / throttle trim and double cost modification of steering angle and control the blinking speed of optional LEDs. Additionally, the transmitter has a workout Mode function which limits cost linked to car for effortless learning (standard environment during circulation is Training Mode).
Special AWD Sports framework is created in the MA-02 framework and features the RA45 unit.
Features VCS front suspension system that optimizes camber enhancement in collaboration with suspension system system system system stroke. Replacement of front suspension system system coil springs is easy without tools required.
Fashioned with strut-type right back suspension system system.
Complete bearing demands have 14 ball bearings.
Laden with drift tires as standard.
Filled with unique mount area and gyro modification amount the optional gyro unit (offered independently).
TECHNICAL INFORMATION
- Length 155.0mm
- Width 68.0mm
- Height 51.0mm
- Chassis MA-020-N
- Wheelbase 90.0mm(M)
- Tread F : 58.5mm R : 58.5mm
- Tire F : 25.0mmx8.5mm R : 25.0mmx8.5mm
- Gear ratio 7.236.385.715.975.344.974.5:1
- Front Wheel Offset Narrow +1.0mm
- Rear Wheel Offset Narrow +1.0mm
- R/C System Syncro KT-531P
- Weight 193g
KIT CONTENT
/li>- R / C unit included complete framework
- Painted and marked complete body
- Syncro KT-531P transmitter
- Mini pylon
- Pinion gear (15T, 17T, 19T, 21T)
- Spur gear (27T, 29T, 31T)
- free nut
- Wheel wrench
- Pinion decrease product
REQUIREMENT TO MAKE USE OF
- AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis.
- AAA-size alkaline batteries x 4 for transmitter
